If you’re in the market for the best flooring nailer, you need to be sure of the features that you want most of all. These devices are either air or fuel-operated. While the former need an air compressor and air hoses to work well, fuel-operated nailers are usually cordless, though more expensive than their air-operated counterparts.
How to choose a flooring nailer
So, your first decision when looking at nail guns is whether you want an air-powered nailer or a cordless model. Air-powered flooring nail guns are less expensive than the cordless that works on gas. But in the case of air-powered nail guns, you will always need to have an air compressor for very job you undertake along with a connection, apart from many air hoses. Also, in case the job site your work at doesn’t have electricity, you need to have a gas-operated air compressor on standby.
Manual Vs. Pneumatic Floor Nailer: If you’re wondering whether to go with a manual or a pneumatic floor nailer, well, here are some bases for you to consider.
- Manual nailers are all-in-one: Floor nailers are specialized devices that are meant for installing hardwood floors. The tool is designed so that the nail enters the plank through the latter’s tongue at pre-set angles. This feature is the one similarity between these two kinds of nailers. Which kind of nailer you eventually choose depends largely on its individual speed, productivity and your own preference.
- Cost: The fact that a manual flooring nailer doesn’t need air compressors or hoses or any other fittings brings down its cost considerably, so overall it would cost lesser than its pneumatic counterparts. If you’re on a tight budget, go for the manual nailers as they will do the job for you on a low cost and faster too. However, if you’re handling a large job, you’d be better off using a pneumatic nailer.
- No cords, no waste of time: If you want to be tangle-free without air hoses getting in your way or power cords running all over the place, a manual nailer is the one for you.
- Choose the lighter, portable model: Why choose a heavy, cumbersome model of nailer that’s going to give you a body ache at the end of the day? Go for a pneumatic nailer for being lightweight and portable. Using a pneumatic means you work more and faster and aren’t all that tired at the end of the day.
- Less jamming with pneumatic nailers: Though nailers in general do jam, yet pneumatic nailers don’t jam as much as manual ones. Jamming leads to lost time in removing stuck nails and overall productivity and you’re on a roll. Decreased productivity, and possible defects caused to the floor when removing bent nails, makes the pneumatic more profitable.
Best Flooring Nailer Reviews: There are a number of nailers in the market today. If you’re looking for one, read the flooring nailer reviews here before you buy:
Bostitch Flooring Nailer:
Recommended – Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer flooring nailer comes to the market with the Bostitch reputation, so you’re sure you’re looking at a quality product. This nailer is engineered to be a high-speed fastening for hardwood flooring. In fact, this hardwood flooring nailer is known for its durability and superb standard-setting performance.
This nailer drives cleats ranging from 1.5″ to 2″ and comes with adaptor plates for flooring that ranges in thickness from 0.5″ to 0.75″. It can be configured with the long handle for added comfort or not. Alternatively, a short handle can also be used. This nailer is made of aluminum used to make airplanes for better durability and low weight. This nailer also has a very wide composite base plate for extra stability. The nailer’s long-reach handle gives users added comfort and control. it provides a driving power of 420 in./lbs. and its operating pressure is 60 psi and 100 psi. Its magazine capacity is much faster at 110 fasteners which helps reduce the time for reloading. This nailer also comes with a mallet.
Porter Cable Flooring Nailer:
Recommended – Porter-Cable PCFP12234 3-Tool Combo Kit Review: This device is excellent value for money because it comes with four equally excellent and highly useful tools that can be used by a novice or an experienced DIY-er. This package makes it extremely versatile, especially if you consider its wide-ranging applications including crown molding, show molding, paneling, interior trim, baseboards, cabinetry, staircases, upholstery, screening, etc.
Its many impressive features include a six-gallon, 150 psi compressor, a 16 gauge finish nailer, an 18 gauge brad nailer, a heavy duty crown stapler and a C2002 porter-cable compressor, among others. The compressor’s oil-free pump gets rid of the need for maintenance while the tank runs at 150 max psi. It is designed to offer the user maximum safety. Besides, at a weight of just 30 kg, it is very easy to carry around. If you’re looking for a combo package that comes with a very powerful compressor, there’s no better one than this.
Freeman Pneumatic Flooring Nailer:
Good Value – Freeman PFL618BR is exceptionally handy with its very useful features, particularly if you lay down wood flooring. Its features include three kinds of fasteners, aluminum and oil-free components that can resist rough use, interchangeable floor plates, a durable carrying case, a seven year warranty, etc. Its other features are a flooring gun, an anodized aluminum magazine, white rubber mallet, a drive blade, white rubber mallet, etc.
The Freeman PFL618BR owes its versatility to the fact that it us capable of shooting not just nails but staples too. It can shoot nails ranging from one inch to 2.5 inches, while the magazine holds 100-120 staples or nails. It can shoot staples ranging between 15.5″-16″ gauge whose length of about 2″.
Its body is constructed out of aluminum, which is durable and therefore dependable at job sites. For enhanced stability, the kit comes with two composite base plants that do not mar, but give protection against scratches.
Now that you have the market’s best flooring nailer reviews, you can go ahead confidently and make your choice.